Salford Group MagnaSpread PLUS+ Spinner Spreader
Features
Build for efficiency and performance, Salford’s BBI MagnaSpread Plus+ combines the use of one spreader to maximize both fertilizer and lime application widths, saving you time and money. This machine has the capacity to spread dry fertilizer up to 120’ and lime up to 60’ – all with one machine. The new MagnaSpread Plus+ builds on the industry leading performance of Salford’s BBI MagnaSpread by adding new technology to maximize your investment.
12' SINGLE AXLE MAGNASPREAD PLUS+ STANDARD FEATURES
- Hydraulic Binary Manifold with pilot operated relief, manual flow controls for spinner and conveyor
- High duty-cycle hydraulics, with oil cooler, GR valve
- Series 6 CV joint PTO shaft
- Overhead mounted spinner motors
- Tandem conveyor drive gearbox
- Stainless steel spinners, fins and spread shield
- 1 set each of fertilizer and ag lime flow dividers and fins
- 12′ Stainless steel hopper with access ladder (Hopper Volume 264 cu-ft struck)
- Over-slung center ‘V’
- 30″ belt-over-bar conveyor
- 90″ to 120″ adjustable axles with 380/90R46 tires
- Heavy-duty tongue jack
- Spreader pan test kit
20' TANDEM AXLE MAGNASPREAD PLUS+ STANDARD FEATURES
- Hydraulic Binary Manifold with pilot operated relief, manual flow controls for spinner and conveyor
- High duty-cycle hydraulics, with oil cooler, GR valve
- Series 6 CV joint PTO shaft
- Overhead mounted spinner motors
- Tandem conveyor drive gearbox
- Stainless steel spinners, fins and spread shield
- 1 set each of fertilizer and ag lime flow dividers and fins
- 20′ Stainless steel hopper with access ladder (Hopper Volume 440 cu-ft struck)
- Over-slung center ‘V’
- 30″ belt-over-bar conveyor
- 20-Ton walking beam suspension with 800/65R32 tires
- Heavy-duty tongue jack and Category 4 Articulating Hitch
- Spreader pan test kit
SPREAD FERTILIZER 120FT. & LIME 60FT. WITH ONE MACHINE
Salford BBI spreaders are designed to save time and cost of application by achieving industry leading application widths. In order to maximize the application width with each material the MagnaSpread Plus requires a spinner and flow divider change over. Switch from fertilizer application to lime application with two people in under 30 minutes! *Maximum application width varies by material quality.
INDUSTRY LEADING APPLICATION TECHNOLOGY
The MagnaSpread Plus uses tried and tested hopper designs, the high-clearance single axle 12 foot hopper or the tandem axle 20 foot hopper, equipped with Salford’s latest advancements in application technology. Engineering improvements make this spreader even more accurate and easy to set. The axle configurations help producers who need the widest application window or those looking for the maximum pay load.
BINARY MANIFOLD OPTION
Patented hydraulics control system – connectivity to all major precision agriculture technology brands
- Variable Rate ready ISOBUS compatibility to most major precision control systems
- Multiple factory-installed systems available
HYDRAULIC FEATURES & OPTIONS
High quality JIC fittings & true hydraulic pipe
GR Valve – increasing chain speed
Hy-Torque manifold – increasing available spinner torque
Specifications
| Series | BBI | BBI |
| Size | 264 cu-ft | 440 cu-ft |
| Product type | Pull Type Spinner Spreaders | Pull Type Spinner Spreaders |
| Model Name Short | MagnaSpread Plus | MagnaSpread Plus |
| Model Name Long | MAGNASPREAD PLUS+ 12' Single Axle Spreader | MAGNASPREAD PLUS+ 20' Tandem Axle Spreader |
Materials Spread
| Fertilizer | YES | YES |
| AG Lime | YES | YES |
| Litter | NO | NO |
| Organics | NO | NO |
| Seed | NO | NO |
| Other | - | - |
| Number of products applied, including optional hopper compartments | 1 | 1 |
Detailed Equipment Specifications
| Paint | Standard Paint Color – Red Optional Paint Color – Green Optional Paint Color – Gray Optional Paint Color – Black Accent Parts (304 SS) |
Standard Paint Color – Red Optional Paint Color – Green Optional Paint Color – Gray Optional Paint Color – Black Accent Parts (304 SS) |
| Hitch | Standard: Cast Hitch for Pull Type Spreaders – includes Pintle and Clevis Hitch Optional: Articulating Hitch |
Standard: Cast Hitch for Pull Type Spreaders – includes Pintle and Clevis Hitch Optional: Articulating Hitch |
| Jack | Heavy-duty tongue jack | Heavy-duty tongue jack |
| Tarp | Standard: No Tarp Option: Tarp for for Standard or High Profile Hoppers Stainless End Caps |
Standard: No Tarp Option: Tarp for for Standard or High Profile Hoppers Stainless End Caps |
| Tail Light | Rear Tail Lights with Turn Signal, Side Markers | Rear Tail Lights with Turn Signal, Side Markers |
| Height | - | - |
| Weight | - | - |
Hopper
| Hopper Size | 12′ High Profile Hopper 264 cu-ft | 20′ 96″ Wide Hopper 440 cu-ft |
| Hopper Material | Standard: 409 Stainless Steel, Painted Optional: 304 Stainless Steel |
Standard: 409 Stainless Steel, Painted Optional: 304 Stainless Steel |
| Hopper Extensions | Standard: No Extension Brackets Optional: Extension Brackets for 6″ boards |
Standard: No Extension BracketsOptional: 6″ extension brackets Optional: Extension Brackets for 6″ boards |
| Hopper Gate Control | Jack Operated Gate | Jack Operated Gate |
| Hopper Ladder | - | - |
| Hopper "Inverted V" | Standard: Removeable Invertered V * The Inverted V running along the length of the hopper help prevent material from bridging in the hopper. |
Standard: Removeable Invertered V * The Inverted V running along the length of the hopper help prevent material from bridging in the hopper. |
| Hopper Sight Window | Standard Sight Window |
Yes |
Metering and Drive
| PTO Drive | Choice: 1000 RPM Series 6 CV 1 3/4 20 Spline Choice: 1000 RPM Series 6 CV 1 3/8 21 Spline Choice: Tractor Supplied Hydraulics for MagnaSpread* *Requires 50 GPM total with max pressure of 2800 PSI. 2 Remotes, 1 at 30 GPM with a 3rd line case drain for Spinners and 1 at 20 GPM for the Conveyor. This hydraulic configuration (does not) include an oil cooler and one cannot be added. Use of 1/2″ coupler on spinner circuit will likely result in reduced performance in heavy applications such as lime. |
Choice: 1000 RPM Series 6 CV 1 3/4 20 Spline Choice: 1000 RPM Series 6 CV 1 3/8 21 Spline Choice: Tractor Supplied Hydraulics for MagnaSpread* *Requires 50 GPM total with max pressure of 2800 PSI. 2 Remotes, 1 at 30 GPM with a 3rd line case drain for Spinners and 1 at 20 GPM for the Conveyor. This hydraulic configuration (does not) include an oil cooler and one cannot be added. Use of 1/2″ coupler on spinner circuit will likely result in reduced performance in heavy applications such as lime. |
| Material Distribution Booms/Spinners/Air Line | 30″ dished spinner design for precision coverage Stainless steel spinners, fins and spread shield |
30″ dished spinner design for precision coverage Stainless steel spinners, fins and spread shield |
| Application Swath Width | Lime: Up to 50 feet Fert: Up to 120 feet | Lime: Up to 50 feet Fert: Up to 120 feet |
| Material Distribution Drive | Standard: Self Contained PTO Hydraulics Optional: Plug to Tractor Hydraulics |
Standard: Self Contained PTO Hydraulics Optional: Plug to Tractor Hydraulics |
| Metering Drive | Tandem conveyor drive gearbox Optional: High Speed Conveyor Valve |
Tandem conveyor drive gearbox Optional: High Speed Conveyor Valve |
| Primary Metering | Standard: 30″ Belt-Over-Bar Chain | Standard: 30″ Belt-Over-Bar Chain |
| Primary Metering Minimum Output Rate | - | - |
| Primary Metering Maximum Output Rate | - | - |
| Secondary Metering | N/A | N/A |
| Secondary Metering Minimum Output Rate | - | - |
| Secondary Metering Maximum Output Rate | - | - |
| Material Banding or Section Control | N/A | N/A |
Tires and Axles
| Axle | - | - |
| Tire and Wheel Options | - | - |
Monitoring and Precision Control
| Monitors Options and Rate Control | - | - |
| Weigh System Option | - | - |
