x
x

Gehl VT320

Double tap to zoom

 

Features

Are you going up against the most difficult challenges on farms and construction sites and need unmatched performance, strength, and durability? Then you need the VT320, our largest vertical lift Track Loader. A machine that’s tougher than any job you can throw at it, the VT320 features an 85 kW engine and 3,200 lbs. of rated operating capacity for powerful lift and torque. That means rough terrain and unpredictable environments won't stop you while you're lifting, loading, and unloading heavy-duty materials from point A to B. Engineered for superior serviceability, productivity, and comfort, this machine gives you the edge over whatever is coming your way on the job site while leaving you prepared for tomorrow. The VT320—it's the pinnacle of Track Loaders.

Specifications

Capacities Imperial
Operating Weight 11799 lbs
Operating Capacity at 35% Tipping Load 3201 lbs
Operating Capacity At 50% Tipping Load 4572 lbs
Tipping capacity 9145 lbs
Weight and dimensions  
Overall Operating Height - Fully Raised 169 in
Height to Hinge Pin - Fully Raised 130 in
Reach - Fully Raised 40 in
Dump angle at full height 41 °
Dump Height - Fully Raised 100 in
Maximum Rollback Angle - Fully Raised 90.30 °
Overall Height to Top of ROPS 83 in
Overall length with bucket 160 in
Overall Length without Bucket 128 in
Specified Height 76 in
Reach at Specified Height 30 in
Maximum Rollback Angle at Ground 31 °
Carry Position 8 in
Maximum Rollback Angle at Carry Position 31 °
Digging Position 1 in
Angle of Departure with STD Counterweight 23.50 °
Ground clearance 12 in
Track gauge 52 in
Track Shoe Width 18 in
Crawler base 62 in
Overall width less bucket 70 in
Bucket Width 84 in
Clearance Radius - Front with Bucket 98 in
Clearance Circle - Rear 74 in
Track Type / Roller Type Rubber / Steel
Performances  
Ground Speed - Single Speed 5 mph
Drawbar Pull/Tractive Effort 12769 lbs
Bucket Breakout - Tilt Cylinder 9903 lbs
Bucket Breakout - Lift Cylinder 7491 lbs
Engine  
Engine brand Deutz
Engine model TD 3.6 EPA Tier IV
Motor Type Axial Piston with planetary gear box reduction
Gross Power (kW) / Gross Power 85 kW / 2300 rpm
Battery 12 V
Cold Cranking Amps at Temperature (CCA) 1600 A
Alternator - Voltage / Ampere 14 V / 120 A
Hydraulics  
Standard flow - Auxiliary hydraulics 29 US gpm
Tank capacities  
Hydraulic tank capacity 10 US gal
Fuel tank 32 US gal
Displacement / Number of cylinders 0.95 US gal / 4